Cat6 network patch cable is the cost-effective solution for indoor data center applications, supporting up to 1000BASE-T within 100m and 10 Gigabit Ethernet over the limited distance specified in the industry. And it is fully backward compatible with all the previous categories.
The Adtek cat6 patch cables conductor apply oxygen-free copper with high electrical conductivity and low signal transmission attenuation. The sheath material is new environmentally friendly material PVC CM, which is durable, flame-retardant, resistant to bending.
Product Details
Cable Type
Cat6 Snagless
Shielding Type
Unshielded (UTP)
Cable Jacket
PVC CM (Round)
Length
4ft (1.2m)
Conductor Material
Oxygen-free Copper
Conductor Type
Stranded
Data Rate Support
1000Base-T and Maximum to 10GBase-T
Standard Bandwidth
250MHz
Gauge (AWG)
24 (7/0.20mm)
Cable Outer Diameter (mm)
6.1 ± 0.4
Max Transmission Distance (m)
100
Pinout
Straight TIA/EIA-568-B
Operating Temperature
-20 to 60°C (-4 to 140°F)
Installation Temperature
-30 to 50°C (-22 to 122°F)
* 250MHz is the standard bandwidth, 550MHz is a reference bandwidth. Our package is marked with 250MHz.
Quality Certification
Quality and standards are the foundation of Adtek. We are dedicated to providing customers with the outstanding, standards-compliant products and services.
Adtek has passed many quality system verification, like ISO9001, RoHS, established an internationally standardized quality assurance system and strictly implemented standardized management and control in the course of design, development, production, installation and service.
FAQ
Q: What is OFC wire? A: CCA wire utilizes an aluminum core that is clad or dipped in copper. It is a suitable choice for lower powered systems or restricted budget applications, although the power transfer is not on the same level as the far superior Oxygen Free Copper (100% OFC) wiring.